Page 74 - Niels Larsen Ltd
P. 74

 For indoor use
 Height of bottom board must not exceed 600mm
The 2Traverse Panels are the ideal way to introduce young people to climbing activities in safety, as travel is horizontal rather than vertical. As the Panels are installed close to the ground neither ropes nor harnesses are required and supervision does not call on any specialist skills or knowledge.
The 2Traverse Panels are manufactured from strong, thick Finnish Birch Plywood. To save installation time, all the Panels are supplied complete with the handholds already fixed by using fixing bolts and ‘T’ Nuts.
As the name suggests these are Traverse Panels and are designed to be installed at low level so it is important to note that the Bottom Panel/Foot Hold Panel is to be fitted no more than 200mm from ground level; this is to ensure that the top edge of the Bottom Panel/Foot Hold Panel is no more than the regulation 600mm from ground level.
1 2Traverse Indoor Panels
The Indoor Traverse Panels are made of 21mm Plywood and have a lacquer finish making them easy to clean. Each section of panel has 10 brightly coloured Holds already pre-drilled and fixed.
Manufactured in 1200mm x 400mm sections so that they can easily be fitted around corners or other obstructions. The bottom panel should be fitted at no more than 600mm high, measured to the top of the panel from the floor.
CWI600 Set of 6 indoor panels with fixing kit CWI650 Set of 12 indoor panels with fixing kit
t: +44 (0) 1924 283000 f: +44 (0) 1924 281872 w: e:

   72   73   74   75   76